The single- or bi-calibre PAC clamps measure the AC and DC currents flowing in cables or small busbars. Designed for professionals, the ZeroDC function is automatic, just like the standby function which can be deactivated if required. With banana or BNC connections depending on the model, they can be used with multimeters, oscilloscopes, power analysers, etc.

For simple configuration of your sensor-head transmitters, particularly:

• Input: type or thermocouple or Pt100
• Output: temperature scale

Associated transmitters:

• 5331     LC5331A-321 / LC5331B-221
• 5333     LC5333A-100 / LC5333B-100
• 5334     LC5334A-100
• 5335     LC5335A-100 / LC5335B-100

Required configuration:

• Processor > 1 GHz
• 1 GB RAM (32-bit) or 2 GB RAM (64-bit)
• 16 GB (32-bit) or 20 GB (64-bit) hard disk space

Operating systems: Windows 7, 8 and 10

Available languages:

• English
• French
• German
• Danish
• Italian
• Spanish
• Swedish
• Dutch
• Finnish

 Version: 8.05.1006

Static relays, statics contactors and power controllers are good replacements for electromechanical power contactors

Usually controlled by control loops, static relays, static contactors and thyristor power controllers handle the switching of the high electrical power required by industrial processes.  

Indeed, their solid-state operating principle overcomes the contact wear problems encountered with electromechanical systems, which cause very costly production downtime. To increase the time between two contact changes, the contactor switching period is extended, leading to deterioration of the control loop.

Electromechanical contactors are designed to switch the power without worrying about the electrical disturbances generated on the network. The higher the power to be switched, the greater the disturbances on the network, which may cause malfunctions on the electronic equipment installed on the network.

Thyristor controllers offer a significantly longer life span with very high switching speeds. On high-value resistive or inductive loads in single-phase or three-phase systems, they offer high accuracy at the level of the control loop. The switching is performed when the network voltage reaches zero, thus minimizing electromagnetic disturbances.

Thyristor controllers offer a significantly longer life span 

On the top-of-the-range models, advanced limitation, control, load supervision and auto-surveillance functions boost the reliability of installations equipped with these devices.

Applications like annealing, drying, melting and heating of glass, plastics or metals often require optimized temperature control. Automation of temperature control ensures that precise temperatures are achieved and that the energy for heating is used efficiently. In this way, installation of a power controller enables more efficient use of raw materials and helps to reduce energy consumption by adapting it according to the requirements.

To sum up, find below the good reasons to buy a power controller

• It's an economical solution
• To overcomes the contact wear problems
• To increase the time between two contact changes
• Without worrying about the electrical disturbances generated on the network
• Thyristor controllers offer a significantly longer life
• For advanced limitation, control, load supervision and auto-surveillance functions
• To reduce energy consumption 

Four models and ratings from 15 A to 600 A.

"Not even afraid"

THYRITOP 100 | 25 to 90 A  | The most widely-used type of static relay in the world of industry

"I've got my eye on you"

THYRITOP 200 | 15 to 120 A | The static contactors required to control electrical loads without electromagnetic interference

"Here comes the heavy mob"

THYRITOP 500 | 25 to 250 A | The ideal power controllers for comprehensive information on the current values, voltages and power values in industrial electric heating processes

"You can't escape me"

THYRITOP 600 | 40 à 600 A | Power controllers which can adapt to all types of industrial heating with field buses, whatever the application

CA PYROCONTROLE guarantees an unlimited life span (in the absence of incidents) for its new range which represents a good replacement for electromechanical contactors.

With their configurable logical and analogue inputs/outputs, CA PYROCONTROLE offers a range covering all your power control requirements, whatever the applications.

Open to a wide range of connection technologies and communication protocols, the new THYRITOP models are totally innovative for the industrial sector. On the THYRITOP 600 model, Modbus RS485 communication is proposed as standard and up to six other protocols are available as options: CANopen, Profibus, Profinet, Ethercat, DeviceNet and EtherNet/IP.

 

Modern, compact and safe power controllers

With their resolutely contemporary design and sleek aesthetics, the new THYRITOP models are also very compact, with a reduced dimensional footprint. This is a major advantage at a time when space saving is crucial for electrical switchboards.

The THYRITOP 600 includes everything you need to keep its operation safe over time, with internal status LEDs visible on the front panel and temperature measurement points on sensitive areas such as the power terminals, the radiator or the power board.

Power controllers designed to simple implementation

The new THYRITOP models are designed to facilitate the implementation and startup phases. Thanks to the PYROTOOLS software which can be downloaded free of charge from the website www.pyrocontrole.com/support, you can display and analyse the parameters and use the function for recording and archiving the data collected. A simple, clever tool which is also free.

Le THYRITOP 600 meanwhile, is equipped with a unit called THYRITOP REMOTE which can be fastened to the front panel of the controller for immediate readings of the main current and voltage parameters, without installing any extra software.

To optimize your energy consumption and stay within the kW or MW limits of your subscription, the PYROAlm module (PYRO Advanced load management) can be used to manage the triggering times of 12 to 64 THYRITOP, thus avoiding any excessive power demand.

Power regulation main sectors of application

• Industrial furnaces for heat treatment
• Melting, sintering and nitriding furnaces
• Furnaces for ceramics and precious metals
• Industrial dryers and ovens
• Autoclaves for composite materials
• Heating systems with infrared lamps (long, medium and short wave)
• Welding applications on conditioning machines
• Furnaces equipped with Super Kanthal™-type silicon carbide heating elements
• Heating systems with single-phase and three-phase transformers
• Air-conditioning, heating (tertiary)
• Curing, lighting

Industrial furnaces, baths, ovens, blast furnaces, heating by induction, the CA Pyrocontrole offer is suitable with the all heat treatment applications. From standard product to a more specific product, our expert service is at your disposal.

CA PYROCONTROLE designs and offers solutions to meat the specific requirements linked to thermal and heat treatment. It measurement expertise helps to reduce maintenance costs and cut energy spending :

• TUS/SAT temperature sensors, process sensorts, load sensors, standard reference sensors
• STATOP Série 600 temperature controllers
• THYRITOP 600 power controllers
• PYROTRACER série 6500 paperless recorders

All about heat / thermal treatment solutions

The "ASYC 4" Android application can be used to connect to version "A" or the new version "B" of the ASYC IV 100,000-count multimeter via Bluetooth.

This only concerns the 6 instruments in the range equipped with Bluetooth: 
- MTX3292B-BT and MTX3292-BT
- MTX3293B-BT and MTX3293-BT
- CA 5292-BT (P01196812) 
- CA 5293-BT (P01196813) 

The main menu offers 4 possibilities:
-Connection to the instrument: detection of the MTX3292–BT or MTX3293-BT or/and CA5292-BT or CA5293-BT instruments nearby by means of the Bluetooth BT 2.0 protocol which is recognized automatically
-Display of the remote measurement and the real-time trace of the measurements in graph form. 
-The configuration function proposes synchronization of the date and time on the instrument and on the Android device. 
-Display of the screenshots available for the real-time display screens for the measurements (texts and curves). The area captured is the whole screen.