background

Our COFRAC-accredited services

Manumesure is accredited by COFRAC (the French Accreditation Committee) for its metrology and calibration services, ensuring compliance with the most stringent regulatory requirements (ISO/IEC 17025).

Contact Us

COFRAC-Accredited Multi-Site Calibration

Services performed in the laboratory or on-site

All of our measurements are traceable to national standards. We perform verification and calibration of your instruments in accordance with COFRAC standards.

The scopes of our accreditations are available at www.cofrac.fr

Electricity & Magnetism

  • MANUMESURE Metrology Laboratory in Reux (Pont l'Evêque) / COFRAC “Calibration” Accreditation No. 2-7495
  • MANUMESURE Metrology Laboratory in Annecy / COFRAC “Calibration” Accreditation No. 2-7495

Scope available at www.cofrac.fr

Voltage, Current, Resistance, Capacitance, Power & Energy

DC voltage: 1 μV to 30 kV / AC voltage: 1 mV to 15 kV

DC current: 1 μA to 4,000 A / AC current: 10 μA to 1,500 A

DC Resistance: 10 μΩ to 1 TΩ / AC Resistance: 0.1 Ω to 10 kΩ

Capacitance: 1 pF to 1 μF

Power (single-phase and three-phase): 100 mA to 10 A at 57.7 V, 100 V, and 230 V / Energy (single-phase and three-phase): 100 mA to 10 A at 57.7 V, 100 V, and 230 V

Time & Frequency

  • MANUMESURE Metrology Laboratory in Annecy / COFRAC “Calibration” Accreditation No. 2-7495

Scope available at www.cofrac.fr

COFRAC Accreditation for Centrifuge Calibration: Rotational Speed & Time

Frequency, Time & Rotational Speed

Frequency: 1 mHz to 26.5 GHz / Time: 1 μs to 1,000 s / Rotational Speed: 6 to 60,000 rpm

Temperature

MANUMESURE Metrology Laboratory in Reux (Pont l'Evêque)

COFRAC “Calibration” Accreditation No. 2-7495

Scope available at www.cofrac.fr

MANUMESURE also performs on-site calibrations of Pt 100 temperature sensors, from -80 °C to +150 °C

Platinum Resistance Thermometers & Thermocouples

Platinum Resistance Thermometers: -80 °C to +500 °C

Thermocouples: -80 °C to +1,200 °C

Pressure

MANUMESURE Metrology Laboratory in Lyon (Meyzieu)

COFRAC “Calibration” Accreditation No. 2-7495

Scope available at www.cofrac.fr

Relative gas pressure

Relative gas pressure: 0 to 2.5 MPa

Absolute gas pressure: 3 kPa to 200 kPa

Dimensional

MANUMESURE Metrology Laboratory in Reux (Pont l’Evêque)

COFRAC “Calibration” Accreditation No. 2-7495

Scope available at www.cofrac.fr

The metrology laboratory in Pont l’Evêque is also equipped with a 3D measuring machine for inspecting parts based on drawings.

Lengths, Diameters, and Threads

Gauge block L: 0.5 to 500 mm

Gauge pin L: 0.1 to 20 mm

Smooth plug Ø: 20 to 200 mm

Threaded plug Ø: 1.6 to 100 mm

Smooth ring Ø: 2 to 200 mm

Vernier caliper L: 0 to 1,000 mm

Depth gauge with sliding carriage L: 0 to 600 mm

External micrometer with screw L: 0 to 200 mm

Mechanical dial indicator L: 0 to 30 mm

Spindle L: 25 to 600 mm

Electronic dial indicator L: 0 to 100 mm

COFRAC-Accredited On-Site Tests

Services Performed On-Site

The scope of our accreditations is available at www.cofrac.fr

Mapping of climate chambers, ovens, drying ovens, thermostatic baths…

MANUMESURE Metrology Laboratory in Reux (Pont l'Evêque)

MANUMESURE is COFRAC-accredited for “Testing” in the area of temperature mapping from -80°C to +400°C and humidity measurement from 5% RH to 95% RH over the temperature range of +5°C to +95°C

Accreditation No. 1-7496

Scope available at www.cofrac.fr

Manumesure’s 12 technical centers are equipped to perform these on-site characterizations for industrial companies, laboratories, hospitals, and manufacturers of ovens, drying ovens, freezers, and more.

Characterizations can be performed in accordance with the French standard FDX 15-140 or the European standard NF EN 60068-3-5/6/7 and 11, as needed.

Regulatory inspections under COFRAC accreditation

MANUMESURE is COFRAC-accredited for “Testing” in the following areas:

Accreditation No. 1-7496

Scope available at www.cofrac.fr

  • Air quality analyses (Reux, Grenoble, and Nantes laboratories)

Analysis of atmospheric pollutants at the source. Automated measurement systems, QAL2/AST procedures.

Monitoring of Occupational Exposure Limits (OELs)

  • Chemistry (Lyon/Meyzieu Laboratory)

Physicochemical analysis of atmospheric pollutants at the source.

COFRAC-Accredited Reference Materials

Services Performed On-Site

“Reference Materials” Accreditation No. 1-5650, Lyon (Meyzieu) Laboratory

Production of certified pH reference materials used to trace and ensure the quality of measurement results. In accordance with the NF EN ISO 17034 standard.

The scopes of our accreditations are available at www.cofrac.fr

background

Our COFRAC Accreditations for Multiple Sites

Manumesure is accredited by COFRAC (the French Accreditation Committee) for its metrology and calibration services, ensuring compliance with the most stringent regulatory requirements (ISO/IEC 17025).

These accreditations cover several technical fields and guarantee the competence of our laboratories as well as the reliability of our measurements.

To offer its customers a consistent level of quality throughout the country, Manumesure has strengthened its organization by implementing a multi-site accreditation model. This development allows us to harmonize practices across our branches, pool expertise, and ensure the same technical standards regardless of the service location.

Accreditations and Certifications Poster